Since the last time I posted, life has been busy with NON ham stuff - 20 or so QSOs this year!
I did wire up the Ham IV, and found that the position sender doesn't work, and I've been SO busy I have not had time to send it out to Norm's to be rebuilt
Sigh
I decided to play in WPX this weekend - ended up playing for 21 minutes - I checked my log
Monday, March 26, 2007
Friday, December 29, 2006
Well, MOST of the parts are here
So, the coax and rotor cables are here. I'm waiting on my Cal-Aero balun (should be here today - I hope - Tuesday at worst) and believe it or not, new pins for the AMP connector for my rotor. Yes, my Ham IV is old enough to have the AMP commector. Tomorrow, I'll probably put the elements for the antenna together, and store them
Thursday, December 21, 2006
Antennas
Well, I've ordered the Glen Martin rooftop mount form my beam - a MP-33 which needs 2 parts (on order). The rotor (a Ham IV) is in the garage, and the mast and thrust bearing arrived today.
Next week, I'll order the coax, and the rotor cable, and I should be good to go
I think I'm going to use 9096-2a for coax
If we get some nice weather (like we have been getting) in a few weeks, I should have the beam up, the Mini - G5RV down, and a 40m Delta Loop in it's place, pluse the 17m/80m trapped dipole moved and up higher. Imagine that, a signal improvement on EVERY band I run (I can't run 12m, 30m, 60m, or 160m)
The eventual goal is still to replace the MP-33 with a Step-IR, but...
Next week, I'll order the coax, and the rotor cable, and I should be good to go
I think I'm going to use 9096-2a for coax
If we get some nice weather (like we have been getting) in a few weeks, I should have the beam up, the Mini - G5RV down, and a 40m Delta Loop in it's place, pluse the 17m/80m trapped dipole moved and up higher. Imagine that, a signal improvement on EVERY band I run (I can't run 12m, 30m, 60m, or 160m)
The eventual goal is still to replace the MP-33 with a Step-IR, but...
Field Day Result
I Never posted how I did on Field Day. As I predicted, I came in forst for class 1E in the NLI section. That turned out to be trivial, as I was the ONLY class 1E in NLI.
I did come in 4th in the Hudson Division for class 1E. Definately have to get the QSO count up. I had 203, where the winning effort (WA2EQF) had 561!. I guess the sleep and off hours killed me. That's the big problem with a 1 man effort
I did come in 4th in the Hudson Division for class 1E. Definately have to get the QSO count up. I had 203, where the winning effort (WA2EQF) had 561!. I guess the sleep and off hours killed me. That's the big problem with a 1 man effort
Tuesday, October 31, 2006
CQWW SSB
Didn't get much time to play in the contest this weekend, there is just too much going on in my life
Ended up running PARTS of 3 different hours - probably a total on the air time of 90 minutes or so
38 QSOs - all on 20m, all while the band was dieing at night, but what the heck
Ended up running PARTS of 3 different hours - probably a total on the air time of 90 minutes or so
38 QSOs - all on 20m, all while the band was dieing at night, but what the heck
Thursday, October 19, 2006
The Beam
Last night, I got a call from Pete (W2IRT) - "XF4 is on the air and LOUD". I get on the air - just a whisper - below ESP level. Man I HAVE to get my beam up. I talked with my XYL - she has given me the OK as my Christmas Gift. Yea! I can start ordering parts before then.
Wednesday, October 18, 2006
Miscellaneous Musings
It's been a LONG time since I posted. My ham radio life has been very slow, as I've been VERY busy. Mom was in and out of the hospital and rehab (Lung Cancer) etc
Anyway, one major problem I had in my station at home was NASTY 'birdies' all up and down the band from my LAN. This is a fairly common problem. I decided to try and fix the problem. Now, as I already HAD shielded Cat-6 cables in place, I knew that was not going to fix the problem. What I did was make up Cat-5e cables that had a type 43 ferrite at BOTH ends. (small ones - 1/2 hole, about 3/4" long). I had to cut off the connectors and put on new ones. I did it scientifically - one cable at a time, one end at a time. Interestingly, at least on MY LAN, the end near the PC was MUCH more important than the end at the router! I'll guess that the LAN circuits in the PC are less balanced than they are in my router (a Linksys). I lowered the noise at the 'birdie' points from about s-6 to about s-1, so I'd say I made a huge improvement.
This last weekend, I replaced my temporary coax to my 80m/17m dipole with it's permanent coax. Now I don't have to open my rear door to use the antenna. Make me a tad more likely to actually USE the antenna
I've had a bunch of cards come in, and I'd like to thank all the stations who sent me cards.
I'm seriously thinking I'm going to order an NMO mount saw. I have a few friends (Hi Pete (w2irt) and John (KB3MTK)) who need antennas put on their trucks (both Ford Rangers...). My old truck was a Ranger, so I know the tricks with that one.
Sometime this winter (actually next 2 months or so) I should be putting up a beam. Going with a Glen Martin 4ft rooftop tower, probably a 6ft mast. I have a MA-33 that I got from the old Knickerbocker Yacht Club station (Thanks Guys). I eventually want to put a SteppIR up there, but that'll wait. Still debating WHICH coax to use. I keep waffling on that.
Unfortunately, I won't get much contesting done this fall. It's an election year, and my job is related to the elections, so I'll be working 7 days/week until after the election.
73 de KG2V - and Good DX (sunspots? What's a sunspot)
Anyway, one major problem I had in my station at home was NASTY 'birdies' all up and down the band from my LAN. This is a fairly common problem. I decided to try and fix the problem. Now, as I already HAD shielded Cat-6 cables in place, I knew that was not going to fix the problem. What I did was make up Cat-5e cables that had a type 43 ferrite at BOTH ends. (small ones - 1/2 hole, about 3/4" long). I had to cut off the connectors and put on new ones. I did it scientifically - one cable at a time, one end at a time. Interestingly, at least on MY LAN, the end near the PC was MUCH more important than the end at the router! I'll guess that the LAN circuits in the PC are less balanced than they are in my router (a Linksys). I lowered the noise at the 'birdie' points from about s-6 to about s-1, so I'd say I made a huge improvement.
This last weekend, I replaced my temporary coax to my 80m/17m dipole with it's permanent coax. Now I don't have to open my rear door to use the antenna. Make me a tad more likely to actually USE the antenna
I've had a bunch of cards come in, and I'd like to thank all the stations who sent me cards.
I'm seriously thinking I'm going to order an NMO mount saw. I have a few friends (Hi Pete (w2irt) and John (KB3MTK)) who need antennas put on their trucks (both Ford Rangers...). My old truck was a Ranger, so I know the tricks with that one.
Sometime this winter (actually next 2 months or so) I should be putting up a beam. Going with a Glen Martin 4ft rooftop tower, probably a 6ft mast. I have a MA-33 that I got from the old Knickerbocker Yacht Club station (Thanks Guys). I eventually want to put a SteppIR up there, but that'll wait. Still debating WHICH coax to use. I keep waffling on that.
Unfortunately, I won't get much contesting done this fall. It's an election year, and my job is related to the elections, so I'll be working 7 days/week until after the election.
73 de KG2V - and Good DX (sunspots? What's a sunspot)
Friday, July 14, 2006
Field Day 2006
Normally I go Upstate and do field Day at WA2GUG's place. This year, due to family commitments (had to watch the children, plus Mom in the hospital), I did Field Day as a class 1E from home
Had a good Field day - 978 points, which SHOULD put me in first for NLI section.
Butt in Chair was a BIG issue - ran frm the start to about 4:30pm, then had to cook dinner for Dad and the kids, so I lost 2 hours there (3 QSOs in 2 hours). Around 2:30am, I hit the wall, and had to sleep. The BIG issue was I set my alarm wrong, and instead of it waking me up at 5:30am, I slept until 7:30am.
My big battery died for tranmit use right around noon - pretty much all I did was get the bulletin. I did get a BUNCH of QSOs on Sunday AM
I'll admit going into the contest tired - with running to the hospital almost every night, I was averaging less than 6 hours of sleep a night
The GOOD news is that it allowed me to ALMOST finish my WAS - I'm still missing New Mexico
Had a good Field day - 978 points, which SHOULD put me in first for NLI section.
Butt in Chair was a BIG issue - ran frm the start to about 4:30pm, then had to cook dinner for Dad and the kids, so I lost 2 hours there (3 QSOs in 2 hours). Around 2:30am, I hit the wall, and had to sleep. The BIG issue was I set my alarm wrong, and instead of it waking me up at 5:30am, I slept until 7:30am.
My big battery died for tranmit use right around noon - pretty much all I did was get the bulletin. I did get a BUNCH of QSOs on Sunday AM
I'll admit going into the contest tired - with running to the hospital almost every night, I was averaging less than 6 hours of sleep a night
The GOOD news is that it allowed me to ALMOST finish my WAS - I'm still missing New Mexico
Weather Station Redux
The Cat-5 change of the weather station cables has worked VERY well. It has not hung up since the change
Thursday, March 02, 2006
Cards/LOTW recently received
W4KUM 20m PSK31
VE7AXU 20m PSK31
J68RI - 10,15,20 SSB - all time new
VO2NS 40m CW - New Zone - 3 to go
PJ2/WB9Z - Card for QSO already confirmed via LOTW - Thank you
K8ZZV 40 SSB
Thanks to all
VE7AXU 20m PSK31
J68RI - 10,15,20 SSB - all time new
VO2NS 40m CW - New Zone - 3 to go
PJ2/WB9Z - Card for QSO already confirmed via LOTW - Thank you
K8ZZV 40 SSB
Thanks to all
Tuesday, February 21, 2006
Tuesday, February 14, 2006
Monday, February 06, 2006
Recent Cards Feb 6th, 2006
LoTW since 1/30
KL7TS - 20m
KG2SB - 20m CW
K6MM - 20M
KL7DX - 20M
C6ANM - 20M AND 40M
W2IRT - 40M
ON4AEK - 20M AND 40M
K9NS - 40M
W7VJ - 20M
One Card
5B/AJ20 - 40m
KL7TS - 20m
KG2SB - 20m CW
K6MM - 20M
KL7DX - 20M
C6ANM - 20M AND 40M
W2IRT - 40M
ON4AEK - 20M AND 40M
K9NS - 40M
W7VJ - 20M
One Card
5B/AJ20 - 40m
Tuesday, January 31, 2006
Saturday, January 28, 2006
Fixed the weather station
About 2 weeks ago, in a NASTY windstorm, my AAG weather station lost it's wind cups. Got around to replacing them today, and figured out why, even though my station SHOULD be a 2 pole wind sensor, it needed 1 pole to read right - helps to have the magnets closer to the reed switches
I also replaced the quad cable with Cat-5e cable - I hope this cuts down on the station hanging up when I transmit
You should be able to see the data from the station on Findu.com, or CWOP
I also replaced the quad cable with Cat-5e cable - I hope this cuts down on the station hanging up when I transmit
You should be able to see the data from the station on Findu.com, or CWOP
Friday, January 27, 2006
Cards Today - Jan 27th
Two cards in the mail today - both from the NAQP SSB
K5LRS
and
W6RLL - which is wrong - has all the ight info except for being 30m CW - as I don't work 30m....
K5LRS
and
W6RLL - which is wrong - has all the ight info except for being 30m CW - as I don't work 30m....
Tuesday, January 24, 2006
Monday, January 23, 2006
Cards Today
3 QSL cards in the mail today
OH5B on 20m
FS/AA4V on 40m for a band fill
and
LU7HN on 10m for a band fill
Also a stack to domestic QSOs from the contest on LoTW
Thank you!
OH5B on 20m
FS/AA4V on 40m for a band fill
and
LU7HN on 10m for a band fill
Also a stack to domestic QSOs from the contest on LoTW
Thank you!
Subscribe to:
Comments (Atom)